Honeywell Bremsbelag GmbH

Directions

 
From Hamburg Fühlsbüttel Airport:
Take the Ring 2 to the Horner Kreisel. Then follow A24 (Berlin motorway), Reinbek exit. Turn right on to the K80. At the first set of traffic lights turn right on to the factory site.

By Car from The South:
From Hannover/Bremen (A7/A1): follow the motorway signs to the A1 towards Lübeck. Exit at motorway intersection HH-Ost on to the A24 towards Berlin. Exit Reinbek/Glinde. Turn right on to the bypass K80 (which subsequently becomes Glinder Weg). Turn right before the first set of traffic lights. Please report to the gate.

By Car from The North:
From Flensburg/Lübeck (A7/A1): follow the motorway signs to the A1 towards Hamburg. Exit Oststeinbek. Turn left into Möllner Landstraße. Straight ahead through Oststeinbek until the town centre of Glinde. Go straight over the major intersection with traffic lights in the centre of Glinde and then turn right immediately after at the 1st intersection with traffic lights into Avenue St. Sebastian. Go past the Obi Markt. Turn right on to the bypass K80 (which subsequently becomes Glinder Weg). Turn right before the first set of traffic lights. Please report to the gate.

Coming By German Rail/S-Bahn:
Central station Hamburg: S-Bahn Linie 21 (dark red marking) towards Aumühle (Bergedorf). The journey time from the central station to S-Bahn Station Reinbek is about 28 minutes. Taking a taxi from Reinbek S-Bahn Station to our company will take about 5 minutes.

Note: Reinbek is one station after Bergedorf. Since not every S-Bahn train on Linie 21 goes as far as Reinbek, and may terminate at Bergedorf, you should either a) travel as far as Bergedorf and take a taxi from the station or Bus Route No. 137 to the “Glinde, Gutenbergstraße” stop (journey time about 10-15 minutes) or b) at the central station wait for the next possible S-Bahn connection to Aumühle (normally every 10 minutes). (timetable information is available, e.g. on the Internet under www.geofox.de or by phoning the information office of the HVV on +49 (0)40 7 19 449)

Honeywell Bremsbelag GmbH
Glinder Weg 1
D- 21509 Glinde
Germany
Phone: +49 (0)40/7271-0
Search

Select Your Language
Select your Language